Road Master Assault "Bobber"

[Kanar]

He said :
You made your own rear wheel with two twin wheels ! He tried too but he made shit...

[psykopat]

That's what I'd like to say !

(but I love to play with Reverso because the automatic translate always make me laugh, sorry SkR8Pn...)

[yanioch]

I' m also interested to know how you do that, if you can explain

[SkR8Pn]

@ Kanar.... lol Thanks

@ psykopat.. lol The translator went crazy saying: dead rat, whore rim, i left you... I wasnt sure if you were pissed at me or excieted...haha Google translator isnt the best and can really make a mess of words.

Ok so ive painted the bike and at first i was in a trance over shiny paint but the affair is over and i need to age/rat it "patina". Any suggestions on how to do this?

Also, i really dont like the forks on the bike and im not to sure what type of forks to make and would really like all of your opinon on what to build.

Triple tree:


Or something old school like these monark springer:

[Kanar]

and why not the two fork in one ?

[yanioch]

Could you show us how you made your wheel, do you have any pictures from the inside?

[SkR8Pn]

and why not the two fork in one ?

i never thought of that... triple tree with springer... I've been trying to search on here trying to find how others have done it and only came up with two forks on a rocker hinge..

@ yanloch, sorry i missed your first post.. psykopat was messing with my mind

ok there are a couple of ways to do this either weld the rims together or drill holes and bolt together..

1st... Get rims side by side and line the valve holes up making sure that the spoke holes are following the same pattern also..

2nd... i then use a 90 angle and start clamping the rims together. Place your first clamp then the second clamp on the opposite side 4 clamps in total with equal spacing between them.

3rd... I then do about a 30mm weld at each clamp. Then remove clamps.

4th... Now that you have 4 equally spaced welds your going to place the clamps in between the welds you just layed. Run the 90 angle over the edge to make sure its all stilll straight then weld 4 more eually spaced welds.. You will then have 8 equally spaced welds.

For a 26" you want to have 16 equally spaced welds.

Remove clamps check for sharp edges If its all smoothe your wheel is ready to be laced and trued!

Goodluck mate

[psykopat]

@ yanloch, sorry i missed your first post.. psykopat was messing with my mind

Sorry.

[SkR8Pn]

@ yanloch, sorry i missed your first post.. psykopat was messing with my mind

Sorry.

Its cool psykopat.. I think it is funny

If i could speak another language id have fun with it too.. you guys are smart and can speak two languages.. Me, well, not so smart.....haha

[SkR8Pn]

Time for update,
Im not happy with the top tube bike looks to square...... so time to change Also feel the back wheel is not wide enough so i made another one.. which also meant i had to make a new upper rear stay

[SkR8Pn]

Some progress:
top tube cut out


new


the new custom wide rim

[irzouts]

the new custom wide rim

Did you made it ? How ?????

[SkR8Pn]

the new custom wide rim

Did you made it ? How ?????

Yes i made it Its two rims and a sheet filler to make it 95mm wide

[SkR8Pn]

Well heres the bike now, i used psykopats ageing tool and removed the paint...haha I'm happy how the wheel turned out and its all steel "NO Bondo(putty) etc" in it. Still no where near as cool as the bikes you guys make...

[El-Zephiro]

Very good job !